The UV-IGNIS is a powerful solution for decontamination of vehicles and public areas by using UV-C radiation with the broadest possible biocidal spectrum. The biocidal spectrum of the UV-IGNIS includes SARS-CoV-2 and the variety of other pathogens (viruses, bacteria, fungi, molds, pathogenic microorganisms), both on surfaces/materials and airborne as well – the UV-IGNIS may be considered as a huge air filter.


Depending on configuration, the UV-IGNIS may consist of:

– one UV-IGNIS 4M control console with 1-4 lines to power 1-4 UV-IGNIS MT1 mobile trolleys,

– 1-4 UV-IGNIS MT1 mobile trolleys (4 trolleys are recommended for an 18m bus, the general rule is: one trolley per one door in a bus),

– reinforced cables and optional mounting elements (if the console is mounted on a wall).

The photos below present the UV-IGNIS MT1 mobile trolley in correct positioning, the UV-IGNIS 4M control console with line no. 1 activated for 3-min radiation time.


The photos below present the UV-IGNIS MT1 mobile trolleys in correct positioning in a conference room and the UV-IGNIS 2M portable control console with a handy holder.

The UV-IGNIS system has passed the required technical trials, carried out by the Department of Electrical Engineering and Electrotechnology of the Lublin University of Technology. Therefore, the UV-IGNIS devices have been marked with the CE certificate.

Essential UV-IGNIS technical specs in the most common configuration for buses and rooms are presented in the table below.

Name Buses Rooms
Configuration 1 x 4M + 4 x MT1 1 x 2M + 2 x MT1
Rated power 1.28 kW 0.64 kW
UV-C radiation power 0.48 kW 0.24 kW
UV-C wavelength 254 nm 254 nm
Console power supply 230 VAC, 50 Hz 230 VAC, 50 Hz
Console protection degree IP30 IP30
Operating ambient temperature 0-60°C 0-60°C
Most common radiation time 2-4 min 5-10 min

Please have a glance at the following videos below to discover how the system operates in its working environment – a bus and a conference room.